Publicité
DF25004B
PART NUMBER
DESCRIPTION
F11063-150
HCS 3/8 x 1-1/2 UNF GR 5 Z
A00550-65P30
Hollow Rubber Spring
A25720-65AJ00
AEON LOCATOR 3.50 x 1.42 w/ AJ Bushing
A16137-003
DISC 3-1/4 OD x 13/32 ID x 3/16 THK PAINTED
B90200
SMALL BLUE BOX - 9.5 x 7 x 5.5
B10000
8" x 12" BUBBLE FOR KITS
B00029-010
BARCODE LABEL FOR KIT
Clearance Instructions:
Rear SES Kits for Pick-Ups and Vans should have a 1/2" to 1-1/2" gap between the rubber spring and contact point when empty.
A partial load, or vehicle accessories will reduce or eliminate the gap.
Front SES kits are usually in full contact.
Medium and Heavy-Duty Trucks, Trailers and Motorhomes will be in constant contact, and have no gap.
Lifetime Warranty:
Timbren SES Kits are warranted against defects in material and workmanship, under normal use and service, for the life of the vehicle on which the kit was
originally installed. The warranty is not transferable and proof of purchase is required. The warranty is limited to the replacement of the failed part.
TIMBREN will not be responsible for any labour or freight charges involved in the replacement of any product. TIMBREN shall be entitled to make its own
inspection to determine the validity of the claim. TIMBREN shall not be liable nor warranty the product in the event of alteration, misuse, overload, negligence
or damage caused by others.
If ride or performance of our product is unsatisfactory in any way, please call: 1-800-263-3113 or email sales@timbren.com
QTY
LOCATION
2
G1C
2
C10B
2
F3B
2
D20B
1
A1-7D
1
2
Issued:
4/27/2011
TIMBREN INDUSTRIES INC.
www.timbren.com
ASSEMBLY NOTES:
PRE-ASSEMBLED KIT
USE LOCTITE
Publicité
