Samsung HW-Q600C Manuel page 36

11 SOFTWARE
UPDATE
Samsung may offer updates for the Soundbar's
system firmware in the future.
USB port
USB (5V 0.5A)
DC 24V
If an update is offered, you can update the
firmware by connecting a USB drive with the
firmware update stored on it to the USB port on
your Soundbar.
USB Update
After the update completes, all your customized
user settings are maintained.
1. Connect a USB drive to the USB port on your
computer.
Important: Make sure there are no music
files on the USB drive. This may cause the
firmware update to fail.
2. Go to (www.samsung.com) → search for the
model name from the customer support menu
option.
• For more information about update, refer
to Upgrade Guide.
3. Download the upgrade file (USB type).
4. Unzip the downloaded upgrade file and copy
the *.bin file to the root directory of the USB
drive.
HDMI
HDMI TO TV
(eARC/ARC)
DIGITAL AUDIO IN (OPTICAL)
USB (5V 0.5A)
5. Turn off the Soundbar and connect the USB
drive containing the firmware update to the
USB port on the Soundbar.
6. Turn on the Soundbar and press the
(Source) button to select USB source.
"UPGR" will be displayed, this may take up to
3 minutes.
• The process of firmware update is
displayed UPGR -> B -- -> DONE -> BYE in
sequence, B or H can be displayed
according to the firmware that is updated.
NOTES
• Soundbar is rebooted automatically when the
update is completed.
• This product has a DUAL BOOT function. If the
firmware fails to update, you can update the
firmware again.
• During update, do not turn it off or remove
the USB.
• If update does not proceed, disconnect and
reconnect the Soundbar power cord.
• When the latest version is installed, no
update is performed.
• Depending on the USB type, update may not
be supported.
• If the connection to the subwoofer is not
re-established automatically after the
update, refer to page 16.
• If the software update fails, check if the USB
drive is defective.
• Mac OS users should use MS-DOS (FAT) as the
USB format.
ENG - 36
UPGR  B -- 
DONE  BYE