Publicité
Les langues disponibles
Les langues disponibles
Step 7: Install the door
Carefully open the top and bottom hinges on the door being
careful as there are many pinch points. Place the hinges
over the 4 screws in the cabinet, 2 at the top and 2 at the
bottom and slide the door into position. Tighten the 4 hinge
screws with a phillips screwdriver. (See Figures 8 and 8a).
Place wire harness from the grille and mount to the bottom
of the door with the screw and "P" clamp removed in step
1. (See Figure 8b). Reconnect the wire harness, (See
Figure 9).
OVERLAY DOOR PANEL INSTALLATION
Cabinet
"Z" bracket
#8 x
⁄
" black
3
4
screws
(3 places)
Figure 22
Step 8: Secure the cabinet
Use the #8 x
⁄
" black screws from the literature pack to
3
4
secure the counter top to the cabinet top through the holes
in the cabinet "Z" bracket.
16
Publicité
