Publicité
Les langues disponibles
Les langues disponibles
Do not use the ladder as a bridge.
•Do not modify the ladder design.
•Do not move a ladder while standing on it.
•For outdoor use caution to the wind.
7.2 Additional requirements for safety marking and user instructions for leaning ladders
Leaning ladders with rungs shall
be used at the correct angle.
Ladders used for access to a
higher level shall be extended at
least 1 m above the landing point
and secured, if necessary.
Do not lean the ladder against
unsuitable surfaces
•Ladder shall never be moved from the top.
7.3 Additional requirements for safety marking and user instructions for standing ladders
Do not step off the side of
standing ladder onto another
surface.
Use the ladder with restraint
devices engaged only.
Do not stand on the top two
steps/rungs of a standing ladder
without a platform and a hand/k-
nee rail.
If a ladder is delivered with stabili-
zer bars and these bars should be
fixed by the user before the first
use this shall be described on the
ladder and in the user instruction.
Ladder for
professional use
Leaning ladders with steps
shall be used that the steps are
in a horizontal position.
Only use the ladder in the
direction as indicated, only if
necessary due to design of
ladder.
Do not stand on the top three
steps/rungs
of
a
ladder. For telescopic ladders
the last metre shall not be
used.
Open the ladder fully before
use.
Standing ladders shall not be
used as a leaning ladder unless
it is designed to do so.
Any horizontal surface which
looks like a platform on a
standing ladder that is not
designed for standing on (e.g.
a plastic work tray) shall be
clearly
indicated
surface, (only if necessary due
to design of ladder).
EN
leaning
on
that
7
Publicité
