Publicité
Les langues disponibles
Les langues disponibles
Thank You
Thank you for purchasing a bagging attachment. It was carefully engineered to provide excellent performance when properly operated and maintained.
Please read this entire manual prior to operating the equipment. It instructs you how to safely and easily set up, operate and maintain your equipment. Please be sure that you, and any other
persons who will operate the machine, carefully follow the recommended safety practices at all times. Failure to do so could result in personal injury or property damage.
All information in this manual is relative to the most recent product information available at the time of printing. Review this manual frequently to familiarize yourself with the equipment, its
features and operation. Please be aware that this Operator's Manual may cover a range of product specifications for various models. Characteristics and features discussed and/or illustrated in this
manual may not be applicable to all models. We reserve the right to change product specifications, designs and equipment without notice and without incurring obligation.
If you have any problems or questions concerning this equipment, phone your local dealer or contact us directly. We want to ensure your complete satisfaction at all times.
Throughout this manual, all references to
List of Contents - 19B30031OEM
Before beginning installation, remove all parts from the carton to make sure everything is present. Carton contents are listed and shown below. The hardware packs included in this kit are detailed
on this page and illustrated on the following page.
•
Hood Assembly – 631-04292
•
Upper Chute Support – 731-17091A
•
Hose – 764-05082
•
Lower Hose Connector – 731-12353A
•
Boot – 731-09173A
•
Grass Bag Assembly (2) – 664-05104
•
Hinge Pin – 711-04988
•
Hanger Assembly – 683-04461C
•
Vertical Support – 683-04519C
•
Rider Hitch Bracket Assembly – 689-00304A
CONTENTS OF CARTON
right
left
and
side of the machine are observed from the operating position.
•
Universal Support Bracket – 783-08129
•
End Plugs (4) – 735-0246A (preinstalled)
•
Hardware Pack – 689-02364
•
Bagger Boot Hardware Pack – 689-00636
Carton Contents
4
700 Series Mounting Kit
(Includes the following parts)
RH Bracket – 783-05889A
•
LH Bracket – 783-05890A
•
Shoulder Bolts – 738-04267 (2)
•
Hex Bolts – 710-04484 (4)
•
•
Flange Lock Nuts – 712-04065 (2)
Clevis Pins – 711-0332 (2)
•
Cotter Pins – 714-0145 (2)
•
Publicité
