Panasonic Technics SL-1000R Mode D'emploi page 16

Troubleshooting guide
Before requesting service, make the below
checks. If you are in doubt about some of the
check points, or if the remedies indicated in the
chart do not solve the problem, contact your
dealer.
No power
z Is the AC mains lead plugged in?
¨Plug the mains lead in firmly. ( 16)
z Is the control unit connected with the main
unit?
¨ I nsert the control unit connection cable
until it clicks. ( 16)
No indication on the display of the
control unit
z Is the power plug connected?
¨Insert it firmly. ( 16)
z Is the power on?
¨ P ress the power button to turn on the
power. ( 24)
z Is the display dimmer activated?
¨ O perate a button (any button other than
the power button) on the control unit.
( 28)
There is power but no sound.
Sound is weak
z Are connections to the amplifier/receiver's
PHONO terminals correct?
¨ C onnect the PHONO cables to the
amplifier's PHONO input terminals. ( 16)
Left and right sounds are reversed
z Are the stereo connection cable connections
to the amplifier or receiver reversed?
¨Double check all connections. ( 16)
z Are connections of the head shell's lead wires
to the cartridge terminals correct?
¨Double check all connections.
Humming is heard during play
z Are there other appliances or their AC mains
lead near the stereo connection cable?
¨ S eparate the appliances and their AC mains
lead from this unit.
z Is the earth lead connected?
¨ M ake sure the earth lead is correctly
connected. ( 16)
30
(30)
English
Error code
„
Occurrence of an error will be notified as
necessary on the display of the control unit and
with the speed selector button indicators of the
main unit.
Display of
the control Measure
unit
Check that the control unit is
Unconnected connected with the main unit.
( 16)
Consult your dealer.
z One of the [33/45/78] speed
selector button indicators of
F58 the main unit blinks (rapidly
F76 or slowly) in orange.
F17 z Provide the displayed
number and the LED's
blinking status at the time of
consultation.
(Example of the display of the control unit in
case of an error)
Unconnected
START ・ STOP
(Example of the speed selector button
indicators of the main unit in case of an error)
Flashes in orange.
33 45 78
Specifications
General
Power supply AC 110-240 V, 50/60 Hz
Power 10 W (Power ON)
consumption 0.05 W (Power OFF)
Dimensions <Control unit>
(W×H×D) 110×84×350 mm
(4- ×3- ×13- )
11/32 5/16 25/32 inch
<Main unit without dustcover>
524×168×392 mm
(20- ×6- ×15- )
21/32 5/8 7/16 inch
<Main unit with dustcover>
531×188×399 mm
(20- ×7- ×15-
29/32 13/32 23/32 inch
Mass <Control unit>
Approx. 2.1 kg (4.7 lbs)
<Main unit without dust cover>
Approx. 38.0 kg (83.8 lbs)
<Main unit with dust cover>
Approx. 40.2 kg (88.7 lbs)
Operating 0 °C to 40 °C
temperature (32 °F to 104 °F)
range
Operating 35 % to 80 % RH
humidity range (no condensation)
Turntable section
Drive method Direct drive
Motor Brushless DC motor
Turntable Brass and Aluminum die-cast
combined
Diameter: 323 mm
(12- )
23/32 inch
Mass: Approx. 7.9 kg
(17.5 lbs)
(includeing the turntable sheet)
Turntable speeds 33-1/3, 45 and 78* rpm
Variable range ±16 %
pitch
Starting torque 0.39 N·m (4.0 kg·cm)
/ 3.47 lb-in
Braking system Electronic brake
Wow and flutter 0.015 % W.R.M.S.
(JIS C5521)
Tone arm section
Type Universal Static Balance
Effective length <Distance from the tone arm
rotation axis to the stylus tip>
254 mm (10 )
inch
<Distance from the tone arm
rotation axis to the spindle>
239 mm (9-
13/32 inch
Overhang 15 mm ( )
19/32 inch
Tracking error Within 1° 48' (at the outer
angle groove of 30 cm (12")
record)
)
Within 0° 30' (at the inner
groove of 30 cm (12")
record)
Offset angle 21°
Arm-height 0 – 15 mm
adjustment range
Stylus pressure 0 – 4 g (direct reading)
adjustment range
Applicable (Without the auxiliary weight)
15.9 to 19.7 g
cartridge weight
range
(With the small auxiliary weight)
(Including the
18.8 to 23.6 g
head shell and
(With the mid auxiliary weight)
mounting screws)
22.5 to 26.3 g
(With the big auxiliary weight)
26.0 to 31.0 g
Terminal section
Output terminal PHONO (DIN Jack)
·straight type cable only
Specifications are subject to change without
notice.
* The turntable speed will be 78.26 rpm when
set to 78 rpm (pitch control 0.0%).
English
)
31
(31)