Publicité
Les langues disponibles
Les langues disponibles
DM 0600BL
Installation and debug personnel should have the specifi c electrical knowledge.
Operators must be trained and authorized.Before installation, carefully read the equipment list. If
any question, please contact our company.
Un-package the package carton, take out accessory boxes.
1 - Accessories
2 - Arm
3 - Arm linkage
Place the column on the body. The direction of the warning label
is forwards. Make the holes on the column base plate align to
thread holes on the body. Use torsion wrench to tight.
Use the wrench to remove the screw n°2 (FIG 6) hexangular shaft
and take off the vertical shaft cap. Install the vertical shaft spring
(FIG7) on the vertical shaft.
Mount the vertical shaft cap and mount the removed screw and
assemble the hand wheel into the nut bushing of the rocker arm .
Remove the lock nut n° 1 at the front end of the bead breaking
cylinder piston rod (FIG 8) and use the wrench to remove the nut
on the bead breaking arm bolt.
Remove the bolt (fi g9) and hang the spring.
SEMI-AUTOMATIC TIRE CHANGER 10"-21" 1
SPEED 230V
OPERATION
4 - Fixing screw
5 - Stripper arm
Publicité
