Publicité
Les langues disponibles
Les langues disponibles
general information
EN
1.3
shipping bracket
WARNING
!
•
The top casting is not fastened to the stove assembly. It simply sits on the stove as a lid. For shipping purposes,
it is held in place by plastic strapping. Once the strapping is cut, the top should be lifted off carefully and stored
in a safe place to avoid damage while completing the installation of the stove. To avoid the appliance being
damaged during shipping, a shipping bracket has been used and must be unbolted before the appliance can
be installed.
SHIPPING BRACKET REMOVAL
A.
Remove the four screws holding the shipping bracket to the bot-
tom of the appliance.
B.
Lift the appliance off the skid and set on a fl at surface.
C.
Discard the screws, brackets and skid.
GLASS DOOR REMOVAL
A.
Lift the top casting off.
B.
Open the valve control cover. Pull the latch handles forward to
release. The door may now be safely removed by swinging the
bottom out and lifting it off.
8
W415-2887 / 04.14.20
SHIPPING BRACKET
LATCH
Publicité
