Product Features; Description; Wire Mapper Pro™ Features - Chauvin Arnoux CA 7028 Notice D'utilisation

2. PRODUCT FEATURES

2.1

Description

The Wire Mapper Pro™ is a hand-held structured cable tester and troubleshooter designed
for use on UTP, STP, FTP & SSTP cabling equipped with RJ45 connectors and wired to either
TIA 568A/B (ISO11801 & EN50137), USOC or ISDN specifications. It detects open circuit
pairs, shorts, crossed wires, crossed pairs, reversed pairs, shield faults and split pairs.
In the event of opens and shorts, the Wire Mapper Pro™ uses TDR technology to indicate if
the fault is at the near end of the cable, the remote end, or if it is somewhere in between. It
will then indicate the distance to the fault.
The Wire Mapper Pro™ has the ability to measure and indicate the length of the cable under
test, using a Vp (Velocity of Propagation), set by the user. It will measure and report the
length of all 4 pairs of wires in the cable under test. It also generates an audible tone that is
transmitted into all 4 pairs on the cable under test. This can be used for cable tracing and
identification.
This instrument also has the ability to identify telephone and data lines. If the main unit is
plugged into an operational RJ45 socket, it will give a continuous warning tone and
appropriate display if a telephone voltage is present on any of the pins. If the Service Detect
key is pressed, it will give a display distinguishing 10base-T, Token Ring and 100Mbit+
connections.
Features:
Hand-held cable and troubleshooting tester
Designed for use on UTP, STP, FTP & SSTP cabling equipped with RJ45
connectors and wired to either TIA568A/B (ISO11801 & EN50137), USOC
or ISDN specifications.
Detects open circuit pair, shorts, crossed wires, crossed pairs, reversed
pairs, shield faults and split pairs.
Indicates location of the fault
Measures and indicates the length of the cable under test
Emits an audible tone, used to trace a cable and identify the type of fault
Identifies telephone and data lines
Up to 16 Remote IDs identified
28
2.2 Wire Mapper Pro™ Features
1
Structured Cable Tester
Chauvin Arnoux
Wire Mapper Pro V1.0
2
TIA568 UTP Vp=75%
3
SERVICE / Vp LENGTH / Vp
4
MAP /
5
C.A. 7028
WIRE MAPPER PRO
1. RJ-45 input connector
2. Graphical LCD
3. Service Test/Vp (Velocity of Propogation) decrement button
4. Wire map test/function select button
5. Backlight button
6. Cable Length Test/Vp (Velocity of Propogation) increment button
7. Tone generator select button
8. Power ON/OFF button
9. Remote ID Unit
6
7
8 1
C.A. 7028
FAULT MAPPER PRO
Remote Unit
29
9