Publicité
Les langues disponibles
Les langues disponibles
5. Plug the mains cable (1) to the socket.
6. The blanket (8) should be covered by a duvet,
for example, otherwise there will be a high loss of
heat and the blanket cannot warm up properly.
Unplug the appliance from the wall socket when
it is no longer in use.
SWITCHING ON
Before each time you use the electric underblanket
(8), please make sure it is not bundled, folded or
creased before it is switched on.
Connect the electric blanket (8) only to 230VAC.
Switch on the underblanket by using the hand-
operated slide switch(4) and there will be 3 times
of beep sound (beep-beep-beep) to ensure the
electric underblanket has been operated correctly.
The warm-up time for this electric underblanket is
15 minutes approximately.
In order to warm up the underblanket faster, it is
recommended to initially set the underblanket at
the highest temperature setting.
Temperature settings :
4
= maximum warmth
2-3 = moderate warmth
1
= minimum warmth
0
= OFF
EN
13
Publicité
