Publicité
Les langues disponibles
Les langues disponibles
EN
DESCRIPTION OF THE DEVICE AND
CONTROLLER (please see fig.A)
1. Mains cable with plug
2. Controller
2-1. 1 controller for single size
2-2. 2 controllers for double size
(2 independent warming zones)
3. APS (Active Protection System) with 3-colored
LED display (on both sides)
4. Slide switch for ON, OFF and temperature
settings (1, 2, 3, 4)
5. Type of the controller
6. Detachable plug-in connector
7. Connection box
8. Electric underblanket
PREPARING FOR USE
(please see fig.B for demonstration of single size)
1. Place the underblanket (8) flat on the mattress,
make sure it is without any folds or ruck-up.
2. The head area does not need to be heated.
3. Join the detachable plug-in connector (6) to the
connection box (7). (See fig. B) (For double-size
blanket, please remember to couple both plug-in
connectors to the connection boxes)
4. Cover the electric underblanket (8) and the
mattress with the sheet, make sure the blanket is
completely flat and the controller(s) (2-1, 2-2) is
not covered by the sheet, pillow or any objects.
12
Publicité
