Adjusting The Time And Day; Programming The Towel Rail - Rointe T Série Manuel D'instructions

2.1. Adjusting the time and day

In order to adjust the time and day of the week, please follow the steps below. First we choose
the hour, then the minutes, then the day of the week:
To enter the time and day adjust mode, press and hold for 3 seconds the
will start flashing.
Select the hour using the
Press once and the minutes will start to flash.
In the same way as with the hours, use
select the correct time.
Once the minutes are correct press
This represents Monday. With the
3 (Wednesday) etc. until we reach the required day. Press
leave the time and date adjust mode.

2.2. Programming the towel rail

It is possible to programme the towel rail using the control panel.
In order to start the programming please ensure that the screen shows automatic mode with
the symbol .
If the screen shows an
By pressing and holding
The first thing you will see is the sun symbol
comfort mode temperature will also be displayed.
Using the and
the comfort mode, from 20ºC to 30ºC.
This temperature will be applied later when programming an hour with the comfort mode setting.
Once the comfort mode temperature is selected, press the
appears flashing. This symbol represents the economy (eco) mode. The economy mode
temperature will also be displayed.
Using the and
15ºC to 19,5ºC. The selected temperature will be applied later when programming an hour
with the eco mode setting.
Next we press the
from (Monday) to
represented by Sel1, Sel2, Sel3,... etc.
Pressing the on/off button
8
and buttons to move the hour up or down.
again so that the day
button we can advance through to day 2 (Tuesday), day
symbol, please press the
for 3 seconds the button we enter programming mode.
buttons we can increase and decrease the temperature desired within
buttons we can increase or decrease the eco mode temperature, from
button to move to selecting the days of the week that we wish to program
(Sunday). These numbers will initially be flashing and they will also be
will select a day, which will stop flashing.
and to increase or decrease the minutes to
flashes.
again to confirm the day and to
button to change modes.
flashing, representing the comfort mode. The
button so that the moon symbol
button.The hours