Locking The Control Panel; Selection Of Temperature; Manual/Automatic Mode; Two-Hour Boost Mode (2H) - Rointe T Série Manuel D'instructions

1.4. Locking the Control Panel

By pressing the keys
the control panel symbol
key is pressed this image will appear in the screen of the towel rail:
To unlock, repeat the same procedure pressing the keys

1.5. Selection of Temperature

By pressing or
set temperature, the towel rail will begin to generate heat and the

1.6. Manual/Automatic Mode

By pressing we change between the Manual and Automatic mode. When the manual mode
is selected, the symbol
the symbol appears on the display.
1.6.1.. Manual.Mode
This enables to choose between the modes of operation COMFORT, ECO and ANTI-FROST,
changing the temperature as indicated in Section 1.5.
1.6.2.. Automatic.mode
This mode activates the programming set on the heated towel rail.

1.7. Two-hour Boost Mode (2H)

By pressing the key
regardless of any other mode. This mode takes priority over any other.
When the heated towel rail is set on the two-hour mode, the screen will show this image:
for a few seconds.
Once the towel rail is set on the two-hour mode, and until the two hours have finished or
the key is pressed again, the display will show this image:
6
and at the same time for 3 seconds, we lock the control panel,
is activated, and the keys will not respond when pressed. If one
we set the temperature. When the room temperature is lower than the
appears on the display. When the automatic mode is selected,
SYMBOL MODE
COMFORT
ECO
ANTI-FROST
, the heated towel rail will work for two hours at maximum power,
and at the same time for 3 seconds.
symbol will appear.
TEMPERATURE RANGE
20ºC TO 30ºC
15ºC TO 19.5ºC
8ºC