Publicité
Power
Speakers
Panel information
1 POWER
Switch
2 POWER/PROTECTOR
Indicator
When
the POWER
switch
is turned on and power supplied to the unit,
the indicator will flash on and off. In several seconds, the indicator
''
stay lit, indicating the unit is ready to operate to its full capacity. aes
whenever the protection
circuit in the unit is activated, the indicator
will flash to notify you of an abnormal condition inside the unit. When
you notice this, shut off the POWER
switch immediately and eliminate
the cause
(such as a short-circuit of the speaker terminals), then turn
the POWER switch on again.
3 SPEAKERS Switch
The SPEAKERS
switch selects the speaker systems you want to hear.
OFF:
To cut off the source from the speaker systems when listening
with headphones.
A: To drive the speaker systems connected to the rear-panel SPEAK-
ERS SYSTEM-A terminals.
B: To drive those connected to the SYSTEM-B terminals.
A+B:
To drive both A and B pairs of speaker systems.
4 PHONES Jack
When you want to listen through a headphone set privately, insert its
plug into the PHONES jack and turn the SPEAKERS switch off.
@
Be sure to disconnect the phones
from
the jack when
not in use.
Publicité
