GETTING STARTED
Charging The Battery
IMPORTANT NOTE: Fully charge the pool vacuum (about 6 hrs) before
using it for the first time.
WARNING!
- KEEP YOUR FINGERS AWAY FROM THE OPENING TO AVOID BEING HIT
BY THE IMPELLER WHEN IT'S ON.
- Use only the original external adaptor and charging cable provided.
- Make sure the pool vacuum and the charging port are clean and
dry before set-up and charging. (TIPS: use a cotton bud to dry the
charging port and charging pins)
- The charging pins are waterproof. However, remnants of water in
the port and around the pins could result in natural occurrence of
stains (a byproduct of chemical reaction between water and electric
currents). Otherwise, the stains can be removed by light scrubbing
with a cotton bud soaked with juice of lemon or vinegar.
1.
OFF/Charge
2.
WARNING! Be sure not to invert the charging cable and ensure
both the charging cable and charging port are clean and dry before
charging them. TIPS: Use cotton bud to dry the charging port and
pins.
3.
4