Publicité
Les langues disponibles
Les langues disponibles
Working Principle
The induction hob comprises a coil,a hotplate made of ferromagnetic material and a
control system.Electrical current generates a powerful magnetic field through the
coil.This procuces a large number of vortices which in turn generate heat which is then
transmitted through the cookingzone to the cooking vessel.
Safety
The hob was specially designed for domestic use.
Protection from over-heating
A sensor monitors the temperature in the cooking zones.When the temperature
exceeds a saf
e level,the cooking zone is automatically switched off.
Detection of small or non-magnetic items
When an unsuitable size or non-magnetic pan (e.g. aluminium), or some other small item
(e.g. knife, fork, key) has been left on the hob, the hob automatically go on to standby in 1
minute. The fan will keep cooking down the induction hob for a further 1 minute.
Auto shutdown
Auto shutdown is a safety protection function for your induction hob. It shutdown
automatically whenever you forget to turn off a cooking zone. The default working times for
various power levels are shown in the below table:
Warning: Anyone who has been fitted with a heart pacemaker should consult a doctor
before using the induction hotplate.
Diagram of induction hob
pan
magnetic circuit
ceramic glass plate
induction coil
induced currents
41
Publicité
