INSTRUCTION FOR USE IB 40 COMPACT GREEN
The blowing allows you to iron without downward pressure on a cushion of air. This
makes ironing of delicate items, or difficult areas (trousers folds, pockets, seams, diffi-
cult areas to reach), much easier and avoids the "false ceases" that seam crushing
can produce.
- For the blowing function set the selector switch
on position "II" and blowing function works
every time the iron's steam button is pressed.
After ironing
- Leave the board on for 10 minutes to dry the cover and remove any possible
condensed water from the board.
- Turn off the ironing unit using the power on/off switch.
- Remove the plug from the socket.
- Let the equipment cool completely.
- Remove the iron cord support.
- Place the iron on the iron rest pad.
- Remove the iron from the board and remove the steam plug from its socket.
- Wind the power supply cord on to the cord winder lugs beneath the board.
- Hold the board leg with your foot to stop it skidding.
- Operate the height adjustment lever and close the board.
Note: do not entangle the power cord
- Store the closed board in a vertical position with the steam generator towards
the floor.
- Always ensure that the board does not skid and tilt. Store the equipment in a dry
place and out of reach of the children
28
Selector
switch