Télécharger Imprimer la page

MIA EW 3682 Mode D'emploi page 15

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 18
Before the first use
Remove all packaging material such as carton and foils.
Unroll the cord completely.
Clean the stainless steel surface and glass with a slightly damp cloth and dry
thoroughly.
If necessary boil some water, empty and rinse the water kettle afterwards to remove
production residues that might be inside. Always take care not to let water run into
the electric parts of the unit.
Place the unit on a stable, dry non-slip and heat resistant surface. Close the lid
properly.
Connect the appliance to the current.
How to use the water kettle
Caution! Danger of burning! The appliance gets very hot during operation. During
operation of electrical caloric appliances, high temperatures – by boiling water, hot
steam or hot body – are generated, which may cause injuries. Only touch the cool
touch handle to open or close! Never touch lid or housing!
Caution! This appliance may be used with the provided stand only.
In order to fill in water, always lift off the kettle from the base station.
Open the lid and fill the reservoir with fresh water. The quantity of water filled in has to
be between MIN and MAX at the water level scale – don't exceed or under-run.
Close the lid carefully until locked. The automatic switch-off works only with a properly
closed lid.
Put the kettle on its base station and switch-on the appliance by pressing the ON/OFF
switch.
The kettle switches off automatically some seconds after the water has started to boil.
Manual switch-off is possible at any time.
If you want to re-boil the water, switch on the appliance again. The boiling process can
be interrupted at any time.
In order to open the lid, pull the unlocking button. In order to prevent scald injuries, pay
attention that neither hot water nor hot steam escape.
The appliance is protected by a security system, which automatically switches off the
kettle, if it is switched on by mistake without water or with not enough water (protection
against dry running).
You may switch-off manually at any time.
After each use for safety reason unplug the appliance
Special tips
The kettle will automatically switch off when the water has come to a boil, control lamp
will switch off. To re-boil simply switch on again. You may interrupt the boiling at any
time by switching off (use On/Off switch).
The appliance is equipped with a safety system and will automatically cut off, should
the kettle be accidentally operated without or with not enough water.
15

Publicité

loading