OPERATION: POWER folding rail (optional)
Using the transmitters:
If you are at the bottom of the staircase, use the transmitter to power the stairlift down.
If the stairlift is above the mid-stop position, the folding rail will not lower
until the chair contacts the mid-stop position.
Once the stairlift has reached the mid-stop position, press the transmitter DOWN
button again to unfold the rail.
Be sure to stand clear of the rail as it unfolds!
If you are at the bottom of the staircase and want to store the stairlift with the rail
folded up, use the transmitter to send the stairlift up to the mid-stop position. Then
press the transmitter UP button again to raise the rail.
Be sure to stand clear of the rail while it folds up!
The power folding rail is equipped with safety features to reduce the chance of injury to
people and pets, as well as damage to property.
©Bruno Independent Living Aids, Inc.
DISABLE
SWITCH
®
If the power folding rail detects an obstruction,
the rail will stop and briefly reverse direction.
To resume operation in the desired direction,
1. clear the obstruction,
2. press the armrest switch or transmitter
button in the opposite direction,
3. press the armrest switch again, in the
desired direction.
Disable switch
The control panel includes a disable switch.
Pressing this switch ON prevents the rail from
folding up or down. You would use this
function if you wished to keep the rail folded
down for an extended period of time.
Be sure to press the switch to OFF allow the
rail to fold and unfold correctly under power!
IN AN EMERGENCY ONLY!
Should you need to raise or lower the power
folding rail, and you are unable to do so with
the armrest switch or the transmitter, switch
the disable switch to OFF. Manually, and GEN-
TLY, raise or lower the rail.
Make sure to lift slowly where indicated by
the "LIFT HERE" decal on
the short rail. Lifting the rail in
a quick, sudden motion may
result in damage to the
folding rail gearbox.
12
SRE-3000 OPERATOR 08 FEBRUARY 2019