Publicité
Les langues disponibles
Les langues disponibles
OPERATING INSTRUCTIONS
MODEL DC7462
CAUTION:
Use supplied hardware for mounting. Torque to 4.5 inch lbs. max.
WARNING:
Do not exceed maximum power ratings. Do not drop. Internal
components are fragile.
Refer to drawing 10043589 at the end of this section for dimensions and connector locations.
Operation of the Model DC7462 is quite simple. The input signal is fed into the connector (J1) marked INPUT
and the output is taken from the connector (J2) marked OUTPUT. The input and output connectors on the unit
are Type WR62.
Forward coupled output is taken from the jack (J3) marked A, and Reverse coupled output is taken from the
jack (J4) marked B. Both coupled output jacks on the unit are Type N (Female).
See Specification Sheet for detailed specification.
Rev A
1
Publicité
