Publicité
Les langues disponibles
Les langues disponibles
NON-DUCTED INSTALLATION ONLY
Note:
a. Purchase Model ANKWC345 Non-ducted
Recirculation Kit from your local dealer.
b. Rooms with 10-foot ceiling require
flue extension model AEWC345
available from your local dealer. Discard
the upper flue supplied with the range
hood and replace it with the longer flue
extension.
1. Remove protective tape from blower outlet
before installing damper to hood with
(4) screws supplied and tape joint with
aluminum duct tape. See Fig. 11.
2. Attach the 6"-to-8" adapter to blower
discharge and tape joint with aluminum
duct tape. Fig. 14.
3. Install the plenum to the upper decorative
flue using (4) 3.4 x 15 mm screws
provided as shown. Fig. 15.
4. Attach 6-inch expandable ducting to the
plenum and tape joint with aluminum duct
tape. Fig. 16.
5. Attach non-duct filter frame using (4) 3.9
x 6 mm screws. Fig. 17.
I
QSB,
- 14 -
6-INCH
TO 8-INCH
ADAPTER
3.9 x 6mm
SCREWS
FIG.14
FIG.15
FIG.16
FIG.17
Publicité
