Publicité
Les langues disponibles
Les langues disponibles
INSTRUCTIONS: How to Disassemble
1
2
3
4
5
6
Remove pusher from feed chute.
Release both side latch arms by
inserting fingers into the two side
openings at the bottom of the motor
base housing and by pulling outward.
Remove cover.
Lifting from the bowl. Simultaneously
lift out bowl, coupling, and strainer
basket/blade assembly. Do not attempt
to remove the strainer basket/blade
assembly by itself.
Separate the pulp chute, strainer
basket/blade assembly and coupling
from bowl.
Remove the Pulp Reception Bin.
SPECIAL NOTE: The stainless steel
basket is a precision-engineered
item that should be handled
carefully. This will help the juicer
run efficiently and smoothly while
increasing its operating life.
11
Publicité
