Télécharger Imprimer la page

Wow STRIKE ZONE 19-2010 Mode D'emploi page 2

Publicité

Les langues disponibles

Les langues disponibles

RELEASE OF LIABILITY:
By assembling and inflating this product, you agree that you have read and understand the entire
World of Watersports' product manual, including all instructions and warnings contained in that material prior to
using this product. You additionally agree that you will ensure any additional or subsequent users of this product
will read and understand the entire owner's manual. Misuse or improper use of this product could result in risks,
dangers and hazards which can result in serious injury or death. The risks and dangers that can be encountered
through the improper use of this product can be avoided by reading and following the warning guidelines listed
within the owner's manual and by proper use of this product. Your assembly and use of this product shall be
evidence of your agreement, to the fullest extent permitted by law, to properly follow the instructions and abide
by the warnings set forth within the product manual. Your assembly and use of this product shall also constitute
a release, to the extent permitted by law, by you and by any third party permitted by you to use, in any manner,
this product, to World of Watersports from any and all liability for any loss, damage, injury and/or expense that you
or any user of this product may suffer as a result of the use of this product. This release shall extend to any loss,
damage, injury or expense due to any cause whatsoever, including negligence or breach of contract on the part of
World of Watersports and/or any party participating in the design and/or manufacture of this product. The terms of
this release shall be effective and binding upon you, your heirs, next of kin, executors, administrators, assigns and
representatives. Your assembly and use of this product shall constitute your agreement to assume and accept
any or all known or unknown risks of injury to you and/or to third parties through the use of this product.
World of Watersports and related parties have not made and hereby expressly deny any oral or written
representation and/or warranty, including warranty for a particular purpose, other than what is set forth
herein and in the World of Watersports' owner's manual.
Product Name
Model#
Approximate
Inflated Size
PATENT PENDING
WOW STRIKE ZONE 19-2010
25 ft x 6 ft 5-12 1-2 5 ft 110 Ibs. 49 kg.
Package Contents: 1 WOW Strike Zone Slide with pontoons, 2 Strike Zone Sleds, 6 Bowling Pins,
Anchor Pins, Product Manual, Patch Kit
Age
Person
Height
Approximate
NOT OVER
Weight Limit
2
THE BEST AIR PUMPS TO USE TO INFLATE YOUR PRODUCT ARE THE FOLLOWING:
1. 110 Volt Electric Pump - E.g. WOW 2.0 to 3.0 PSI High Pressure Air Pump
or any 110 Volt Electric Pump with 2.0 to 3.0 PSI
2. WOW Double Action Hand Pump or Foot Pump specifically designed for your
WOW STRIKE ZONE SLIDE product.
3. 12 Volt Pump pumps can also be used but their maximum output is only .8 psi so a secondary pump such a
hand pump or foot pump will need to be used.
4. Leaf Blower
5. Shop Vac or vacuum with two-way switch
6. Do NOT use an air compressor.
1.
2.
W O W S T R I K E Z O N E S L I D E S E T U P W A R N I N G S & I N S T R U C T I O N S :
• Before setting up the slide, check under and around the slide for sharp objects or any other
objects that could cause injury or damage the slide.
• The WOW STRIKE ZONE SLIDE should be placed no less than 10 feet away on all sides from trees, walls,
holes, pools and other objects. Make sure the area at the start and the end of the slide is free of
pavement, trees, pools, and any other objects that could impede or injure the slider.
• Use on level lawns only. Do not use on pavement or any other hard surfaces.
• Make sure your lawn area is free from of sprinkler heads, rocks, bumps, sunken depression areas,
sticks, or other potential sharp objects.
• Place the slide with the printed floor graphic side facing up. The beginning of the slide will have
the graphic words START.
• If you are connecting more than one slide together make sure the slides are connected properly using the
pontoon side wall locking connection system found on the end of the pontoons. Make sure the end of the first
slide's floor is overlapped on top of the next slide's floor. See the instruction in this manual for more information.
• Layout the slide in the proper recommended area and inspect the slide for rips, tears, or
punctures. DO NOT USE THE SLIDE IF DAMAGED.
2.
3.
3

Publicité

loading