Publicité
Les langues disponibles
Les langues disponibles
Installing a DIMM
1.
Locate the DIMM sockets in the motherboard.
2.
Unlock a DIMM socket by pressing the retaining clips outward.
3.
Align a DIMM on the socket such that the notch on the DIMM matches
the break on the socket.
4.
Push the DIMM to the socket until the retaining clips snap inward.
•
Unplug the power supply before adding or removing DIMMs. Failure to
do so may cause damage to the motherboard and/or components.
•
A DDR DIMM is keyed with a notch so that it fits in only one direction.
Do not force a DIMM into a socket to avoid damaging the DIMM.
Installing an expansion card
1.
Remove the metal cover
opposite the slot that you
intend to use.
1 1 1 1 1
3.
Insert the card connector to
the slot, then press the card
firmly until it fits in place.
4.
Replace the metal bracket
lock.
8 8 8 8 8
2.
Remove the metal bracket
lock.
2 2 2 2 2
4 4 4 4 4
Q u i c k i n s t a l l a t i o n g u i d e
Q u i c k i n s t a l l a t i o n g u i d e
Q u i c k i n s t a l l a t i o n g u i d e
Q u i c k i n s t a l l a t i o n g u i d e
Q u i c k i n s t a l l a t i o n g u i d e
3 3 3 3 3
Publicité
