Publicité
Liens rapides
BBBBBBBBBBB
BMMM MMMMM BM MMMMMMM
Date of Purchase: ____/____/_____
Lot Number:
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Do Not Return This Product!
Contact our customer service team for help first
Call: 1-800-489-3351 (toll free)
Visit: www.ameriwoodhome.com
WARNING
–Unit can tip over causing severe injury or death.
–Anchor unit to stud in wall (if instructed to)
–Do not allow children climb on unit
–Put heavy items on lower shelves or drawers
BBBBBBBBBBBBBBBBBB
Easy
Follow Ameriwood Home
122023PK
Tough
Publicité
Manuels Connexes pour Ameriwood HOME Monticello 7962319COMS
Sommaire des Matières pour Ameriwood HOME Monticello 7962319COMS
- Page 1 Visit: www.ameriwoodhome.com Easy Tough WARNING Follow Ameriwood Home –Unit can tip over causing severe injury or death. –Anchor unit to stud in wall (if instructed to) –Do not allow children climb on unit –Put heavy items on lower shelves or drawers...
- Page 2 BMMtaMt UM! MM NBT MMtuMM thiM pMMduMt! Contact our friendly customer service team first for help BaMM uM! ViMit amMMiwMMdhMmM.MMm 1-800-489-3351 HMMpfuM HiMtM PEOPLE NEEDED FOR ASSEMBLY: B - Open your item in the area you plan to keep it for less heavy lifting. - Identify, sort, and count the parts before attempting assembly.
- Page 3 BMfMMM YMu BtaMt BMfMMM YMu BtaMt Read through each step carefully and follow the proper order Separate and count all your parts and hardware Give yourself enough room for the assembly process Have the following tools: Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing, please be aware to slow down and stop when screw is tight.
- Page 4 Please Note: You may need to lightly tap the wood dowels with a hammer into the holes during your assembly process. Wood Dowel Insertion: Insert wood dowel Not Actual Size completely into the hole. Wood Dowel Wood Dowel will Actual Size extend out approximately 3/8”.
- Page 5 BMaMd IdMMM f MaM MM Not actual size T7962319S010PK T7962319S020PK T7962319S030PK TOP PANEL SIDE PANEL LEFT SIDE PANEL RIGHT T7962319S040PK T7962319S050PK T7962319S060PK BOTTOM PANEL CENTER RAIL LEFT CENTER RAIL RIGHT T7962319S070PK T7962319S080PK T7962319S090PK PARTITION UPPER DRAWER FRONT UPPER DRAWER SIDE LEFT T7962319S100PK T7962319S110PK T7962319S120PK...
- Page 6 BMaMd IdMMM f MaM MM Not actual size T7962319S130PK T7962319S140PK T7962319S150PK UPPER DRAWER BACK LOWER DRAWER FRONT LOWER DRAWER SIDE LEFT T7962319S160PK T7962319S170PK T7962319S180PK LOWER DRAWER SIDE LEFT LOWER DRAWER SIDE RIGHT LOWER DRAWER SIDE (LOCK) RIGHT (LOCK) T7962319S190PK T7962319S200PK T7962319S210PK LOWER DRAWER BACK DRAWER BOTTOM...
- Page 7 HaMdwaMM Bag RMfMMMMMM NumbMM: BBBBBBBBBBBBBBB BaMt LiMt Actual Size FMM aMy MMpMaMMmMMt haMdwaMM, MMdMM uMiMg paMt # BBBBBBBBBBBBBBB TPK0001 TPK0002 TPK0004 TPK0008 CAM BOLT CAM LOCK DOWEL SCREW 15 x 9 M8 x 30 CBS M4 x 38 TPK3013 TPK0015 TPK0032 PH SCREW JCBC SCREW...
- Page 8 HaMdwaMM Bag RMfMMMMMM NumbMM: BBBBBBBBBBBBBBB BaMt LiMt Not Actual Size x1 SET TPK3012 TPK2004 TPK0014 HANDLE ANTI TIPPING KIT HEX KEY ameriwoodhome.com...
- Page 9 Step 1 TPK0001 TPK2004 Properly insert Cam Bolts (1) to Top Panel (A) and Bottom Panel (D) and fully tighten Loosely attach Anti-Tipping Kit (9) and (9c) to Top Panel (A). Note: This will be tightened in Step 20. ameriwoodhome.com...
- Page 10 Step 2 TPK0014 TPK0004 TPK0032 Connect Legs (V) to Bottom Panel (D) Insert Dowel (3) into Legs (V). using JCBC Screws (7) and tighten with Hex Key (10) Tight ameriwoodhome.com...
- Page 11 Step 3 TPK0001 TPK0002 TPK0004 Proper orientation of CAM LOCK Insert Cam Bolts (1), Cam Locks (2), and Dowels (3) to Left Side Panel (B) and Right Side Panel (C). ameriwoodhome.com...
- Page 12 Step 4 TPK0001 TPK0002 TPK0004 Proper orientation of CAM LOCK Insert Cam Bolts (1) x 3, Cam Locks (2) x 4, and Dowels (3) x 4 to Right Face Partition Panel (G). Flip the Partition (G) and insert Cam Bolts (1) x 3 to Left Face Partition (G). Right Face TuMM BvMM Left Face...
- Page 13 Step 5 TPK0002 TPK0004 Proper orientation of CAM LOCK Insert Cam Locks (2) into Left Center Rail (E), Right Center Rail (F), and Counterweight Panel (X) x 2. Insert Dowels (3) into Left Center Rail (E) and Right Center Rail (F). ameriwoodhome.com...
- Page 14 Step 6 Attach Left Center Rail (E) and Counterweight Panel (X) to Left Side Panel (B), tighten by turning cam locks clockwise. LESS DISTANCE LONGER DISTANCE Pro Tip: Second person recommended for ease of assembly on this step. ameriwoodhome.com...
- Page 15 Step 7 With the assistance of a second person, attach Partition Panel (G) to Counterweight Panel (X) and Left Center Rail (E), tighten by turning cam locks clockwise. Pro Tip: Second person recommended for ease of assembly on this step. ameriwoodhome.com...
- Page 16 Step 8 With the assistance of a second person, attach Counterweight Panel (X) and Right Center Rail (F) to Partition Panel (G), tighten by turning cam locks clockwise. LONGER DISTANCE LESS DISTANCE Pro Tip: Second person recommended for ease of assembly on this step. ameriwoodhome.com...
- Page 17 Step 9 Attach Right Side Panel (C) to Right Center Rail (F) and Counterweight Panel (X), tighten by turning cam locks clockwise. Pro Tip: Second person recommended for ease of assembly on this step. ameriwoodhome.com...
- Page 18 Step 10 Attach Bottom Panel (D) to Left and Right Side Panels (B) & (C) and Partition (G). Tighten by turning cam locks clockwise. Pro Tip: Second person recommended for ease of assembly on this step. ameriwoodhome.com...
- Page 19 Step 11 With the assistance of a second person, carefully stand the unit upright. Position and attach Top Panel (A) to Partition (G) and Left and Right Side Panels (B) & (C). Tighten by turning cam locks clockwise. Pro Tip: Second person recommended for ease of assembly on this step. ameriwoodhome.com...
- Page 20 Step 12 TPK0015 IBBBRTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY. With the assistance of a second person, carefully lay the unit face down. Attached Back Panel (W) using nails (6) as shown and nailing straight into the raw edges. Ensure that the unit is square. Distance from corner to corner must be equal as shown.
- Page 21 Step 13 TPK0001 Properly insert Cam Bolts (1) to Upper Drawer Front (H) x 2, Upper Drawer Back (M) x 2, Lower Drawer Front (N) x 4, and Lower Drawer Back (S) x 4 and fully tighten. ameriwoodhome.com...
- Page 22 Step 14 TPK0002 Proper orientation of CAM LOCK Insert Cam Locks (2) into Upper Drawer Side Left and Right (I), (J), (K), & (L), and Lower Drawer Side Left and Right (O), (P), (Q), & (R), and Drawer Support (U) x 6 as illustrated. ameriwoodhome.com...
- Page 23 Step 15 Attach Upper Drawer Side (I), (J), (K) & (L) to Upper Drawer Front (H) x 2 by turning cam lock clockwise. Attach Lower Drawer Side (O), (P), (Q) & (R) to Lower Drawer Front (N) x 4 by turning cam lock clockwise. ameriwoodhome.com...
- Page 24 Step 16 Attach Drawer Support (U) to Upper Drawer Front (H) x 2 and Lower Drawer Front (N) x 4, tighten by turning cam lock clockwise. ameriwoodhome.com...
- Page 25 Step 17 Insert Drawer Bottom (T) into the grooves of Upper Drawer Sides (I), (J), (K) & (L) and align with the groove in Upper Drawer Front (H). Insert Drawer Bottom (T) into the grooves of Lower Drawer Sides (P), (Q), (O) &...
- Page 26 Step 18 TPK0008 Line up the groove in Drawer Back (M) with Drawer Bottom (T) and attach to Left and Right Upper Drawer Sides (I), (J), (K) & (L) using Screws (4). Do NOT over-tighten. Attach Drawer Back (M) to Drawer Support (U) and tighten by turning cam lock clockwise.
- Page 27 Step 19 TPK3013 TPK3012 Connect Handles (8) to Upper Drawer Front (H) and Lower Drawer Front (N) using Screws (5) as illustrated x6. ameriwoodhome.com...
- Page 28 Step 20 For Masonry, Concrete, or other wall materials: Consult your local hardware store for appropriate anchors to securely attach the safety bracket. IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER. FOLLOW THESE INSTRUCTIONS TO INSTALL THE ANTI-TIPPING SAFETY BRACKET PROVIDED WITH THIS PRODUCT.
- Page 29 Step 21 Carefully insert the Upper Drawer (H) x 2 into the unit as illustrated. NMtM: Please insert all the drawers into correctly direction by following the draft, interlock system will not function if wrong inserted the drawer. ameriwoodhome.com...
- Page 30 Step 22 Carefully insert the Lower Drawer (N) x 4 into the unit as illustrated. NMtM: Please insert all the drawers into correctly direction by following the draft, interlock system will not function if wrong inserted the drawer. ameriwoodhome.com...
- Page 31 Maximum Loads This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. 75 lbs. 34 kg 10 lbs. 4.5 kg Each Drawer Warning: Risk of serious injury to person - do not place a television on this furniture. This furniture is not approved for use with a television.
- Page 32 We would like to extend a big “Thank You” to all to assemble this our customers for taking the of our customers for taking the time to assemble Seeds product, and to give us your valuable this Ameriwood Home product, and to give us your feedback. valuable feedback ameriwoodhome.com...
- Page 33 Español BubiMMta MMMaMtMMa Este libro de instrucciones contiene información IMPORTANTE de seguridad. Por favor lea y manténgalo para referencia en el futuro. No Regrese este producto! Comuniquese con nuestro amistoso equipo de servicio al cliente para obtener ayuda. Llamenos al: 1-800-489-3351 (Gratis) Visitar: www.ameriwoodhome.com PRECAUCION Este mueble puede volcarse y causar graves heridas y/o muerte.
- Page 34 Español Página 11 Paso 3 - Inserte el Bolt(1) x6, el Lock(2) x8, el Dowel(3) x8 en el panel lateral(B) y (C). Página 12 Paso 4 - Inserte el Bolt(1) x3, el Lock(2) x4, el Dowel(3) x4 en el panel de partición de la cara derecha(G). Gire la partición (G) e insertar Cam Bolt(1) x3 en la partitura de la cara izquierda(G).
- Page 35 Español Página 28 BaMa mampMMtMMía, hMMmigóM u MtMMM matMMiaMMM dM paMMd: Consulte con su ferretería local para anclajes apropiados para fijar firmemente el soporte de seguridad. IBBBRTANTE: ESTA UNIDAD DEBE SER ASEGURADA A LA PARED PARA AYUDAR. SIGA ESTAS INSTRUCCIONES PARA INSTALAR EL SOPORTE DE SEGURIDAD ANTI-TIPPING PROPORCIONADO CON ESTE PRODUCTO.
- Page 36 Français BABBT AVANT Ce livret d’instructions contient d’importantes informations de sécurité. S’il vous plaît lire et conserver pour référence ultérieure. Ne pas retourner ce produit! Contactez notre équipe de service à la clientèle amical pour aider. Appel: 1-800-489-3351 (gratuit) - Visite: www.ameriwoodhome.com BIBE EN GARME Ce mobilier peut basculer et causer des blessures graves et / ou la mort.
- Page 37 Français BagM BB Étape 3 - Insérez le Bolt(1) x6, le Lock(2) x8, le Dowel(3) x8 dans le panneau latéral(B) et (C). BagM BB Étape 4 - Insérez le Bolt(1) x3, le Lock(2) x4, le Dowel(3) x4 dans le panneau de partition à droite(G). Tournez la partition (G) et insérez Cam Bolt(1) x3 dans la partiture de gauche(G).
- Page 38 Français BagM B8 Pour la maçonnerie, le béton ou d’autres matériaux de mur: Consultez votre ferrailleur local pour des ancrages appropriés pour fixer fermement le support de sécurité. IBBBRTANT : Cette unité doit être fixée au mur pour vous aider. Suivez ces instructions pour installer le support de sécurité...