Sparco MAX S2 Mode D'emploi page 6

ASSEMBLY
Fix the stem tube and lock the kickstand.
1
Use the hexagon wrench in the box to tighten
3
the 6 screws on all 3 sides of the handlebars.
Tips: When installing the screws, please install all the 6 screws on
1/2 of the pole, and then tighten them separately to prevent the front
part from warping.
6
Fix the handlebar into the stem tube with the screws in the box.
2
After the installation is complete, detect the scooter by switching
4
it on and o .