Batavia MAXXPACK BT-CTB001 Mode D'emploi page 11

Warning!
The vibration and noise emission during actual
use of the power tool can differ from the
declared total value depending on the ways in
which the tool is used, in particular, what kind
of work piece is machined.
It is necessary to identify safety measured to
protect the operator that are based on an esti­
mation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is
switched off and when it is running idle in addi­
tion to the trigger time).
Try to minimize the impact of vibration and
noise. Exemplary measures to reduce vibration
exposure include wearing gloves while using
the tool, limiting working time, and using acces­
sories in good condition.
9. Accessories - optionally available
Item
Brush hard (red)
Thick strong hair for tough spots
Perfect for (ceramic) indoor and outdoor
tiles, outdoor wooden furniture, wooden
decks, walls, garage doors, and many
more
Brush medium (blue)
Medium hairs for all round cleaning
Perfect for boats, (ceramic) indoor and
outdoor tiles, outdoor wooden furniture,
wooden deck, walls, floors and many
more
Brush soft (black)
Soft hairs for delicate surfaces
Perfect for boats, caravan/camper, tiles,
metal surfaces, mobile homes, and many
more
Extension pole
Extension of the reach by approx. 85 cm.
10. Disposal
Do not dispose of electric power tools
with domestic refuse.
The electric power tool is shipped in
packaging to reduce transport damage. This
packaging is a raw material and as such can
either be reused or can be fed back into the raw
material cycle. The electric power tool and its
accessories are made from various materials
such as metals and plastics. Take defective
components to a special refuse collection
point. Ask about these at your specialist shop
or local council.
Batteries
10.1.
Think of the environment when disposing of
batteries. Contact your local authorities to fin
out where your nearest disposal area is. Do not
dispose of batteries with domestic refuse. Do
not dispose of by burning, risk of explosion.
11. Declaration of conformity
We, the Batavia B.V., Weth. Wassebaliestraat
6d, NL-7951 SN Staphorst, declare by our
own responsibility that the product Twinbrush,
Item-No 7064170, Model Nr. BT-CTB001 is
according to the basic requirements, which are
define in the European Directives Electromag­
Item no:
netic Compatibility 2014/30/EU (EMC),
7064253
2006/42/EC (Machinery), RoHS: 2011/65/EU
and their amendments. For the evaluation of
conformity, the following harmonized stand­
ards were consulted:
EN62841-1:2015+A15;
EN IEC 62841-2-3:2021;
7064252
ISO12100:2010;
AfPS GS 2019:01;
EN IEC 55014-1:2021;
EN IEC 55014-2:2021
Staphorst, 26 June 2023
7064251
Jin Min, QA Representative
Batavia B.V., Weth. Wassebaliestraat 6d,
7951 SN Staphorst, Netherlands
7064279
The product and the user manual may be
subject to changes. Technical data may be
changed without prior notice.
English
9