EN
PRECAUTIONS FOR USE
1. Place the diffuser on a flat and stable surface and away from the edge.
2. Remove the diffuser's outer cover and then the inner cover.
3. Pour mineral water (bottled or tap water) into the water tank up to the maximum level
indicated (110ml).
4. Then add a few drops of home fragrance (3-6 drops) to the water tank.
5. Replace the covers on the diffuser.
6. Insert the adaptor's connector into the DC jack input at the back side of the diffuser. Plug
the adaptor into the outlet.
Avoid home fragrance or acetone chemicals dropping on the Iron Shell.
FONCTIONS ET CARACTÉRISTIQUES
Power button (POWER) :
1- Press at first time, mist continuously on for 3 hours;
2- Press at second time, turn off.
Mist button (MIST MODE) :
1- Press at first time, mist intermittently on for 6 hours (on/off per 15
seconds);
2- Press at second time, mist continuously on for 3 hours.
AC 100~240V
50/60Hz
-13-