Klarstein WONDERWALL 60 Mode D'emploi page 19

OPERATION
• Check the heater to be sure it is not damaged.
• Then, plug in it and then switch on the main illuminated ON/OFF switch on the side
of the heater.
There are two way to use the heater:
(1) Power ON/OFF
Press the on/off button on the control panel, and then the heater will start to work until
your room temperature reached the set temperature. If need to power off the heater,
press the on/off button again.
(2) Week timer Mode
Start the heater with week timer option: Press the Set button, and then press the ON/
OFF straight way.
How to set the Week timer
1. Press Timer button when the heater is power off (make sure the main illuminated
switch is on).
2. After step 1, the WEEK symbol in the LCD display will start to flash, you can choose
the day you want to set the timer by pressing the[+] or [-] button. Press SET again.
EN
19