FLAEM Smarty P0315EM Mode D'emploi page 7

3 - UNIT CONFIGURATION
4
5
4 - OPERATION
1A
1B
3.1 Connect the desired accessory to
3
If a mask is used, place it on the face as
shown in the picture
2F
For effective therapy, after setting the appliance
up, sit in a comfortable and relaxed position and
proceed. Select the preferred delivery mode ("ON
DEMAND" or "CONTINUOUS")
4.1 By pressing buttons (1A-1B) they light up as
follow:
FLASHING BLUE: for a few seconds, until a
complete initialization of device.
STEADY BLUE: nebulisation
FLASHING RED: batteries are used up; re-
place with new batteries of the same type
4.2 ON DEMAND button (1A) Press this button
when inhaling to obtain the delivery of medi-
cation without waste. The device only works
if you hold down the button, which will turn
blue.
4.3 START AND STOP / CONTINUOUS button
(1B): Press this button to obtain the "CONTIN-
UOUS" delivery of medication (fast treatment).
7
the Accessories connection port
(2F):
- Mouthpiece (3)
- Child mask (4)
- Adult mask (5)