Technical Data - Magnat NEO FLEX 130 Mode D'emploi

DEAR CUSTOMER,
We congratulate you on acquiring this MAGNAT Car Stereo Product. You are now
the proud owner of a top high-quality car audio appliance, which we hope will give you
many years of enjoyment.
Please read these instructions carefully so as to ensure optimum and
disturbance-free functioning of the appliance. Technical modifications reserved.
YOUR NEW SUBWOOFER.......
......is the ultimate extension to your car stereo system. It is designed to reproduce the
bass range right down to the lowest frequencies as dynamically as possible. The
speaker system should be connected to your car stereo amplifier, something we
recommend in every case. Technical data plus tips and further advice are also
contained in these instructions.

TECHNICAL DATA

Load capacity RMS / max.:
Impedance (nominal):
Frequency range:
Response:
Dimensions (wxhxd):
Weight:
POSITIONING AND SECURING THE SUBWOOFERS
Ensure that the subwoofer cabinet rests on an even surface. The cones (and, where
applicable, the bass reflex tube) should not be placed directly against the car's
interior walls.
Make sure that the subwoofer is secured in such a way that it cannot slip or slide.
Damage resulting from sudden changes in speed (e.g. hard braking) is not covered
under the terms of our guarantee.
GB
NEO FLEX 130
230 w / 460 w
4 ohm
22 – 500 Hz
90 dB / w / m
390 x 370 x 370 mm
9 kg
9
NEO FLEX 230
325 w / 650 w
4 ohm
22 – 500 Hz
92 dB / w / m
685 x 370 x 380 mm
16 kg