Pro-Tronik AP6210BLC Mode D'emploi page 29

Charger specifications :
Input voltage
Power
Charge current
Discharge current
Charge for NiCd / NiMh
Charge for Li-on / Li-Po / Li-Fe
Lithium Balancing
Lead Acid charge
Temp sensor
Weight
Dimensions
Batteries specifications (for 1 cell) :
NiCd / NiMH
Nominal Voltage
Charging current
Discharge cutting Voltage
Li-Ion
Nominal Voltage
Max charging Voltage
Charging current
Discharge cutting Voltage
Technical specifications
11 to 18 V D.C.
200W max. (charge)
0.1 to 10A max
0.1 to 5A
1 to 19 cells
1 to 6 cells
300 mAh , +/- 15mV factory set
2 to 24 V
20°C to 80°C. using optional temp sensor.
480 g
14.3 cm x 11.9 cm x 4.2 cm
1.2 V
0.1 Ah - 10 Ah
0.9 V (NiCd) / 1.0 V (NiMh)
3.6 V
4.1 V
1C
2.5 V
Li-Po
Nominal Voltage
Max charging Voltage
Charging current
Discharge cutting Voltage
Life
Nominal Voltage
Max charging Voltage
Charging current
Discharge cutting Voltage
Pb (Batterie au Plomb)
3.7 V
Nominal Voltage
4.2 V
Max charging Voltage
1C
Charging current
2.8V
Discharge cutting Voltage
3.3 V
4.6 V
1C - 4C
2.0 V
2.0 V
2.46 V
0.1C - 0.4C
1.8 V