VI. BOX ENTRIES (WITHOUT SWIVEL NIPPLE): When entering a
control enclosure or box with regular wireway, make a cutout in the
enclosure as shown in detail 11. The box connector and a gasket
are positioned inside the enclosure, while another gasket is placed
between the outside surface of the enclosure and the adjoining
wireway section. See detail 12 for the proper arrangement.
VII. HANGERS: Assemble hangers as shown in
details 13 and 14. Note that the hanger does not
fit between the adjacent wireway flanges. These
hangers may be attached to the wireway flange in
various positions.
87565317
Installation Instructions
Feed−Through Wireway
Gasket
© 2018 Hoffman Enclosures Inc.
3ENGLISH
Enclosure
Box Connector
Flange Gasket
Detail 11 Units: Inch
Drop Hanger
Detail 13
PH 763 422 2211 • nVent.com/HOFFMAN
Wireway Section
Detail 12
Bracket Hanger
Gasket
Detail 13
- 5 -