Fast Start Quick Reference Guide; Spraying Instructions; Cleaning Instructions - Homeright CommandMax HVLP Manuel D'instruction

FAST START QUICK REFERENCE GUIDE

Spraying Instructions

1
SKIN INJECTION HAZARD
RISK OF EXPLOSION OR FIRE
HAZARDOUS VAPORS
1. Read all warnings and safety
instructions in the owner's
manual before use.
5
See manual for grounding
instructions
5. Plug sprayer into outlet.

Cleaning Instructions

1
1. Unplug sprayer, remove
container, and empty contents.
This is only a quick reference.
Read the entire instruction manual prior to using the product.
2
2. Thin material as necessary.
(See page 8.) Remove and fill
container with material. Use a
filter to strain material if it is old.
6
6. Adjust spray pattern to horizontal,
vertical, or cone. (See page 9.)
2
2. Fill sprayer with cleaning solution
and operate trigger until solution
comes through nozzle.
COMMAND MAX™ HVLP SPRAYER
3
3. Insert the pick-up tube into the
cylinder housing. (See page X.)
7. Set the flow to maximum by
turning the volume control knob
fully clockwise.
3
3. Remove parts. Clean and dry
thoroughly according to Step
Two of the Clean Up instructions.
See page 10.
(C800766)
5
4
4. Attach container to sprayer.
8
HAZARDOUS VAPORS
8. Spray surface, keeping sprayer
level. Use a sweeping and
overlapping motion.
ENGLISH