CONTINENTAL EDISON CECWC105C Guide D'utilisation page 28

1. Parts for door reversing
①Door hinge cover
Handle screw ⑦Handle
2. Handle installation
Our wine cooler is delivered with the handle in a separate
package.
To install the handle:
① Take out the handle; point it precisely to the two holes on the
left side of the door.
② Push aside the door seal to reveal two holes; insert the screws
and screw the handle up.
4. Reversing the door
Our wine coolers are delivered with the door opening from left to right. To reverse the opening
direction:
1) Close the door.
2) Take off the door hinge cover
①on the up right corner; Unscrew the flange screws②;
Take off door hinge③; Remove the up left side cap④.
3) Lift the door up until the door gets off the lower door
hinge⑤.
4) Unscrew the lower door hinge.
②Flange screw ③Door hinge ④Cap
28
⑤Lower door hinge ⑥