Reversing the door
The door can be changed from left and right side. No special requirement, all the door is opened from left side. If required
to open from right side please refer to the following direction.
1. Lower hinge (right)
4. Door
7. Top hinge (left)
10. Door limit device
Open the door to 90 degrees, remove the two screws (2) from the lower door axis (3), remove the door (4)
1.
and door axis (Fig. A).
Position the door (4) safely and remove the plug (12) from the top of the door frame. Unscrew one screw (11)
2.
at the bottom and remove the door limit device (10). Install the door limit device (10) at the top of the door frame. Please
use the spare plug (12) to block the hole at the top of the door frame (Fig. A/B).
Take out three hinge screws (6) from the upper hinge (right) (5) and remove it (Fig. C).
3.
2. Screws
5. Top hinge (Right)
8. Decorative nail
11. Screw
3. Door axis
6. Hinge screws
9. Lower hinge (left)
12. Plug
42