Maintenance And Cleaning Schedule - Altrad TAIL-060-T23 Notice Originale

Dispose of remaining fuel in an environmentally
compatible manner.
Operate the engine until the carburettor is empty.

Maintenance and cleaning schedule

Maintenance work
Fuelling
Lubricate the gearbox
Check the cutting blade
Replace the cutting blade
Replace the thread knife
Throttle trigger / throttle lock-out
switch / ON/OFF switch –
Functional test
Throttle trigger / throttle lock-out
switch / ON/OFF switch –
Have it replaced
Cranking rope - Functional test
Cranking rope
Have it replaced
Check the fuel and oil tank caps
- Replace
Clean fuel filling filter
Clean the fuel filter
Replace air filter
Cleaning the air filter
Replace air filter
Spark plug
Check the spark plug connector
Replace the spark plug
Clean the silencer
Check the carburetor in idle speed
(cutting device may not move)
- Have this adjusted
Check the machine
Clean the machine
Replace the safety label
Before After
each use
each use
Check the machine for perfect condition to ensure a safe
use of it after a longer period of storage.
Every Every Every 100
8 Std. 25 Std.
IfIf
hours
required /
damaged
Each
season
25