Electronic Control; Tool Settings; Dust Extraction; Edge Protector - Rotex RO 125 FEQ Guide D'utilisation

3 .1

Electronic control

ELECTRON I C
Smooth start-up
The smooth start-up ensures jolt-free startup.
Speed adjustment
You can regulate the speed steplessly between
3,000 and 6,000 rpm using the adjusting wheel
(3.1). This lets you optimize the sanding speed to
suit the material.
Constant speed
The pre-selected speed remains constant whether
the tool is in operation or in neutral position.
Temperature control
To prevent overheating, the safety electronics
switch the tool off when it reaches a critical mo-
tor temperature. Let the tool cool down for ap-
prox. 3-5 minutes before using it again. The tool
requires less time to cool down if it is running, i.e.
in neutral position.

Tool settings

from the socket before carrying out any work on
the power tool.
4 .1
Always connect the tool to a dust extractor.
You can connect a Festool extractor with an
extractor hose diameter of 27 mm to the
dust extraction port (4.1).
5 .1
The edge protector (5.1) prevents the sanding pad
from touching the edge perpendicular to a surface
(e.g. when sanding along a wall), thereby prevent-
ing the machine from rebounding.
Assembly: Slide the edge protector onto the ma-
chine until it latches into place.
7
The tool has full-wave electronics with the
following features:
Always remove the power plug

Dust extraction

Edge protector