Philips HI 980 Mode D'emploi page 7

Cleaning
- Before cleaning remove the mains plug from
the wall socket and allow the iron to cool down
sufficiently.
- The appliance can be cleaned with a damp
cloth.
Storage
- For transport there
are handgrips on
either side of the
steam tank (fig. 14).
• Regularly check if the
mains cord and the
supply hose are still in
a good and safe
condition.
For U.K. only:
Fitting a different plug
This appliance is fitted with a BS 1363 13 Amp.
plug.
Should you need to replace the plug, connect the
wires as follows:
Always fit the same value of fuse as that originally
supplied with your appliance.
Only use BS 1362 approved fuses.
As a guide only: Appliances under 700 W can
have a 3 Amp. fuse (red) and all others should
have a 13 Amp. fuse (brown).
Green/yellow wire to the Earth terminal (E) of
the new plug.
Brown wire to the Live (L) terminal of the new
plug.
Blue wire to the Neutral (N) terminal of the new
plug.When disposing of an old plug (particularly
the moulded type which has been cut from the
mains cord) always remove the fuse as the plug
could be dangerous if ever inserted in a live
socket.
14
7