Publicité
Les langues disponibles
Les langues disponibles
1.2
Before starting a washing program make sure that:
•
The water supply tap is open.
•
The correct amount of detergent has been added to the
dispenser.
•
The baskets have been correctly loaded.
•
The spray arms are able to rotate freely and without
obstruction.
•
The dishwasher door is securely closed.
QUICK PROGRAMS OPTION
Select this option together with any washing program (except the soak
program) to SHORTEN the cycle by from a minimum of 10% to a
maximum of 55%, depending on the cycle selected. To activate this
option, press the QUICK PROGRAMS OPTION button
comes on) after selecting the program required. The option is
automatically deactivated at the end of the program.
ENERSAVE OPTION
This option can be selected with the wash programme of choice to
further reduce energy consumption. Drying is aided by a special
device that automatically releases the door, which opens slowly and
smoothly by a few centimetres. This ensures perfect drying and greater
control of rinsing temperatures, which can be kept at lower levels for
significant energy saving.
Once the door has opened, the dishwasher
emits a short beep and programme lights
nos. 4 and 5 flash to indicate the end of the
washing cycle.
Enersave is activated automatically every time a wash cycle is
selected (except for programs that do not include the final drying phase;
see programs table) and can be disabled before the program is started.
When the function is activated, opening of the door must not be
impeded in any way; do not leave anything in the space in front of the
door necessary to allow it to open. Do not re-close the door during
automatic opening as this would damage the mechanism. Wait for the
pushers to retract before re-closing the door.
8
User instructions
Washing programs
(light
Publicité
