Bartscher AL 10 Mode D'emploi page 44

The refrigerator-flash freezer is prepared for a new rapid cooling cycle.
To begin the next cooling cycle, press and hold for 3 seconds one of the following
buttons
Rapid freezing with time regulation
1. Insert the probe into the food product.
CAUTION!
Insert the internal product temperature probe into the food product to a maximum
depth of 2 – 3 cm.
2. Press the button for freezing with time regulation 2 times
3. Set the desired time by pressing
for freezing with time regulation
4. Activate the cycle by pressing the START button
5. The rapid freezing cycle is finished when the set time for rapid freezing has elapsed.
6. The conservation phase begins automatically. During the conservation phase, the
internal unit temperature will be displayed in red.
During the rapid freezing cycle it is possible to view the internal unit temperature by
pressing the button „freezing with temperature regulation via the probe for measuring
internal product temperature"
the display for 5 seconds.
It is also possible to display the elapsed freezing time by pressing the button „freezing
with time regulation"
- 44 -
.
or
.
. The internal unit temperature will appear in green on
. The elapsed time will be displayed for 5 seconds in green.
.
and confirm by pressing the button
.