OPERATING INSTRUCTIONS
OF REMOTE CONTROL SL2392W USED IN COMBINA-
TION WITH "W" AND "M" RECEIVER SYSTEMS
Remote control SL2392W has 99 channels, therefore it can
control up to 99 receivers.
It features:
•
a display showing the channel number se-
lected
•
two push-button controls marked with
arrows
gramming for the remote function.
•
two push-buttons for channel selection,
marked by
•
a Reset push-button for immediate return
of the indicated channel to channel 00
Operation:
When the remote control display is turned off, press any key
to activate it; a 3-second animation will appear. To move the
blind, press the
of low speed, then release it when high speed is activated.
To tilt the blind, slightly press the
To program the remote control, refer to the instructions en-
closed to "W" and "M" receiver systems. The remote control
will turn off after 30 seconds of inactivity.
Battery substitution
When remote control batteries are
exhausted, the display will show
the message "Batt". In order to
replace the transmitter battery,
open the back cover, remove the
spent battery and introduce a new
one (CR2430 3V Lithium).
for raise and lower, and pro-
N° REVISIONE
or
push-button throughout the duration
S.B.
DIS.:
ing. G.Nicolosi
APPR.:
08.02.13
DATA:
Disegno
di
proprietà
40
11
DESCRIZIONE
DESCRIZIONE:
Telecomando radio
MATERIALE:
TRATTAMENTO:
or
push-button.
CLIENTE:
della
Pellini
S.p.A..
Vietato
esporlo
N° REVISIONE
DESCRIZIONE:
S.B.
DIS.:
MATERIALE:
GB
DATA
DISEGNO:
SL2392
Pag. 1 /3
±0.2
TOLL. GEN.:
SCALA:
o
riprodurlo
senza
autorizzazione.
DESCRIZIONE
Telecomando radio
7
DISEGNO:
SL23