Publicité
Les langues disponibles
Les langues disponibles
Working with the G-ST 8000+
Overview
After the G-ST has been started and successfully integrated into a network, you can
work with the device. The G-ST uses the following applications which can be opened
using the start bar or from the desktop using a double click:
There are three integrated wizards, which help you to set up your system:
Working with
G-Set can be started on the client side or directly on the server. If you have opened
G-Set on a workstation computer, in the program you must create and save a cor-
G-Set
responding connection on the server.
G-Set is the G-ST setup client. In this Windows interface, you set the re-
cording parameters, modify and assign passwords and access rights and
add additional users for the system.
Connection Wizard
Here you create, manage and verify connections to servers
(Password, Ping, Connection).
Media Channel Wizard
You can see, report and manage all available cameras on the network
Event / Alarm Wizard
Events and alarms are created and managed here.
18
Back to the
table of contents
~
Publicité
