SPECIAL SECURITY ADVICE
- The protective frame must be closed properly during
operation.
- Do not place anything in the protective frame. Do not
cover the protective frame during operation.
NOTE
For ecological reasons, we use the non-visible area of the stand as a stand exclusively
heavy weight recycled material.
To safeguard the environmental idea, we do not also for environmental reasons, a
thorough cleaning of this weight because it is not visible during operation.
STRUCTURE
ASSEMBLY
Remove the wing screw from the motor pain.
-
Fit the rear cage onto the motor pain. Make sure that the 2 holes on the motor match
-
the 2 holes on the rear cage. Fit the wing screw and screw it on firmly.
Put the blade on the motor pain and carefully tighten the screw.
-
Fit the front cage onto the rear cage and fix them together using the metal clips.
-
Tighten the small screw.
OPERATING INSTRUCTIONS
The fan has 3 speed settings:
0 = Device off
I = Low speed
II = Medium speed
III = High Speed
The fan can operate in oscillating or stationary mode. Press the oscillation button to
activate the oscillating mode.
CLEANING AND CARE
Always switch the fan off and unplug it before cleaning.
-
All manuals and user guides at all-guides.com
1. Handle
2. Rear grille
3. Oscillation button
4. Speed controller
5. Front grille
6. Stand