Publicité
4.5 DC protector
The DC protector turns to "OFF" (2) automatically when the electric
device connected to the generator is operated above rated flow. To
use this equipment again, turn on DC protector by pressing its button
to "ON" (1)
(1) "ON"
Outputting direct current.
(2) "OFF"
Not outputting direct current.
• Reduce the load of the connected electric device below the
specified rated output of the generator if the DC protector turns
off. If the DC protector turns off again, stop using the device
immediately and consult your local dealer.
4.6 Engine smart control (ESC)
(1) "ON"
When the ESC switch is turned to "ON", the economy control unit
controls the engine speed according to the connected load. This
results in better fuel economy and reduced noise output.
(2) "OFF"
When the ESC switch is turned to"OFF", the engine runs at the rated
r/min(4500r/min) regardless of whether a load is connected or not.
TIP: The ESC must be turned to"OFF"when using electric devices
that require a large starting current, such as a compressor of a
submersible pump.
14
CONTROL FUNCTION
CAUTION
Publicité
