ARDES AR5R06D Instructions D'emploi page 15

Press On/Off button one time to activate the fan. The unit will start to operate and lower
speed and the "Low" indicator light will illuminate on the display.
Press On/Off button when unit is on to turn it off.
SPEED Button (B):
Press Speed button when unit is on to select the desired air speed: lower, medium or high.
The selected speed is indicated by indicator light on the control panel: "Low" is lower
speed, "Mid" is medium speed, "High" is high speed.
TIMER Button (C):
When the unit is operating, you can set the timer to switch the fan off automatically after
the set time. Press Timer button repeatedly to select the desired time period in 2 hours
increments from 2 hours to 12 hours. The related indicator light (2H, 4H, 6H) will illuminate
on the control panel. When all the indicator light are off means that timer is not setted and
the unit will continuously work until you switch off manually the unit.
SWING Button (D):
Press Swing button when the unit is operating to activate the automatic left/right oscillation
of vertical louvres. The "Swing" indicator light will illuminate on the control panel. Press
again Swing button to deactivate the automatic swing; "Swing" indicator light (G6) will turn
off on the control panel.
COOLER Button (E):
Press Cooler button (E) when the unit is operating to activate the evaporative cooling
function.
This function use water so make sure about water level in the water tank before turn on this
function. The ice boxes provided increase the cool effect: before use, fill them with water
and put in the refrigerator until they are completely frozen. After that insert the frozen ice
boxes in the water tank making sure that water level is under maximum level allowed. When
this function is activated, the "Cooler" indicator light (G5) is illuminated in red colour on the
control panel.
To deactivate the evaporative cooling function press Cooler button (E).
If the evaporative cooling function is deactivated, the "Cooler" indicator light (G5) is off on
the control panel and the unit work as a fan.
Mode Button (C)
Press this button when unit is on to select the desired mode: normal, natural mode (the
indicator light G4 will blink in the control panel) or sleeping mode (the indicator light G4 will
turn on in the control panel).
(EN) Maintenance
Before carrying out routine cleaning, switch off the fan and disconnect mains power. For
external cleaning use a soft and dry cloth.
DO NOT dip the device in water, or splash it with any other liquids.
DO NOT use solvents or any other chemical products for cleaning it.
When you do not use it, after cleaning it, store the fan in a dry place.
DAILY CLEANING
To reduce bacteria and scale residues, empty the water tank every day after use and dry it
with a soft and clean cloth.
15 / 60