Publicité
Les langues disponibles
Les langues disponibles
Using the child lock
You can use the child lock to safeguard against a child unintentionally turning on
a cooking zone and activating the cooking surface. Also, the control panel, with
the exception of the POWER key, can be locked to prevent the settings from being
changed unintentionally, for example, by wiping over the panel with a cloth.
Switching the child lock On/Off
NOTE
•
If you activate the child lock while the cooktop is operating, touch the POWER
button to turn the cooktop off for safety reasons.
•
If the child lock is enabled when the cooktop is not operating, all buttons will
be disabled including the POWER button.
NZ30K7880U_DG68-00823A-07_EN+MES+CFR.indb 21
NZ30K7880U_DG68-00823A-07_EN+MES+CFR.indb 21
1.
Touch the Child Lock key for
approximately 1 seconds.
An acoustic signal will sound as
confirmation.
2.
Touch any control key.
will appear in the displays,
indicating the child lock has been
activated.
3.
To switch the child lock off, touch the
Child Lock key again for 1 seconds.
An acoustic signal will sound as
confirmation.
Timer
1.
2.
The timer can be adjusted from 0 to 99.
3.
NOTE
•
To change the settings quicker, touch and hold any of the
until the desired value is reached.
•
When the timer is terminated, it sounds a beep 4 times. However, the cooking
zone will not be turned off.
Press the Timer key. The number 10
will be displayed above the timer
display.
Use the Timer setting selectors (
or
) to set the desired amount of time.
Then, press Timer key again.
NOTE
To cancel the timer settings, hold down
the Timer key for 3 senconds.
or
control keys
English 21
2022-11-23 오후 1:46:36
2022-11-23 오후 1:46:36
Publicité
