Publicité
Les langues disponibles
Les langues disponibles
Operation
CORRECT
Flat pan bottom & straight sides.
Pan size meets or exceeds the
recommended minimum size for the
Cooking Zone. See "Using the correct
size cookware".
Pan rests completely on the Cooktop
surface.
Pan is properly balanced.
NOTE
ANY one of the incorrect conditions listed above may be detected by the sensors
located below the ceramic cooktop surface. If the cookware does not meet one
or more of these conditions, one or more of the Cooking Zones will not heat, and
settings will flash in the affected Cooking Zone display. Correct the problems
before attempting to activate the cooktop.
26 English
NZ30K7880U_DG68-00823A-07_EN+MES+CFR.indb 26
NZ30K7880U_DG68-00823A-07_EN+MES+CFR.indb 26
INCORRECT
Curved or warped pan bottoms or
sides.
Pan does not meet the minimum size
required for the Cooking Zone used.
See "Using the correct size cookware".
Pan bottom rests on cooktop trim
or does not rest completely on the
cooktop surface.
Heavy handle tilts pan.
Cookware for induction cooking zones
The Induction element can only be turned on when cookware with a magnetic
base is placed on one of the cooking zones. You can use the cookware identified as
suitable below.
Cookware material
Cookware material
Steel, Enamelled steel
Cast iron
Stainless steel
If appropriately labelled by the manufacturer
Aluminium, Copper, Brass
Glass, Ceramic, Porcelain
NOTE
•
Cookware appropriate for induction cooking is labelled as suitable by the
manufacturer.
•
Certain cookware can make noise when being used on induction cooking
zones. These noises do not indicate that the cooktop is malfunctioning and do
not affect its operation in any way.
Suitable
Yes
Yes
No
No
2022-11-23 오후 1:46:39
2022-11-23 오후 1:46:39
Publicité
