Publicité
Les langues disponibles
Les langues disponibles
Battery Replacement
1.
sert into slot located on the side of the unit
as shown and carefully pry the front of the
unit up, working your way around the edge
until the front is completely separated from the
housing.
Note:
tact located inside the unit as shown does not
fall out during the replacement process.
2.
batteries from clip and replace.
Note:
y that the battery polarity is correct
when replacing. Batteries are stacked
in series and polarity is indicated.
3.
© 2012 Directed. All rights reserved.
All manuals and user guides at all-guides.com
Using a small slotted screwdriver, in-
Make sure that the small elastomer con-
Turn the circuit board over, remove
Verif
Reposition all parts and snap together.
Front
Elastomer
contact
Circuit Board
+ +
+
5
Publicité
