Youin VALENCIA Manuel De L'utilisateur page 4

Bike Assembly
Deploy the Product
1- Grab the seat and the handlebar. Rotate the front half of the frame forward around
the hinge until the front wheel is in the driving position.
2- Lift the locking lever (picture 1) to fully unfold the frame until you hear a click. Flip
the lever forward and close it so the frame is secured, finally lower the safety tab..
3- Turn the pedals to their horizontal position (picture 2).
4- Raise the handlebar to its vertical position and close its locking lever (picture 3).
5- Place the handlebar and the saddle at the desired height (picture 4 and 5).
Picture 1
Picture 4
Insert, unlock and remove the battery
1- Open the frame release key and fold your e-bike to
access the removable battery.
2- Insert the key into the keyhole and turn it so that the
battery unlocks and can be removed (image 6).
3- Do the same steps in reverse to reinsert the battery
4- In order to turn on your e-bike, the internal switch of
the battery must be in the on position (image 7).
4
YOUIN VALENCIA
Picture 2
Picture 5
Picture 3
Picture 6
Picture 7